● Temperature range: 15C above ambient to 350C (662F)

● Control Accuracy: +/-1.0C(+/-1.8F)

● Resolution: +/-0.1C(+/-0.2F)

● Workspace capacity: 4.2 to 24.0 cubic feet

● Heat up time to 350C (662F) (empty chamber withdampers dosed): 60 min. (or less depending on model and voltage)

● Uniformity. Blue M can provide varying levels of uniformity;if you have a specific tolerance or specification which mustbe met, please contact us with your requirements so wecan ensure the equipment is designed, tested, and adjustedto meet those requirements

● Available with profiling or single set point temperature controls

● Horizontal air flow assures uniform thermal performance under most loading conditions

● Exdusive Blue M Eterna heating elements - the most reliable available, with heavy-gauge high temperature nickelchromium wire and low-watt density for longer service life

● Air flow switch provided as standard to protect oven andoroductAdjustable one-pass air flow system - tempered air passesover heater(s) and through chamber only once if necessaryreadily adjusted to suit a broad range of product loads andoperating requirements. Motorized damper available forautomatic operation

● Direct drive, multi-blade, centrifugal blower with high-volume air delivery and dynamically balanced for minimumnoise

● Adjustable air intake and exhaust dampers

● Adjustable shelf levels

● Fiberglass insulation to ensure safe cabinet skin temperature

● Heavy-duty door - double-wall, insulated construction

● Independent, over-temperature protection (high limit controller) included

● Corrosion resistant, stainless steel (type 304) interion

● All-welded, heavy-duty exterior with heavy-gauge, reinforced, cold-rolled steel

● Baked on white powder-coated enamel finish on exterior for long-lasting corrosion protection

● Every oven is fully assembled and individually factory tested

● Circuit break provided for ground fault protection as standard

● Single or three phase operation available in 50 hz or 60 hz

● Nickel-plated wire rod or stainless steel slottedshelves

● Door switch (disables heat and circulationblower upon door opening)

● Motorized intake damper (two-position orproportional)

● Welded and sealed inner chamber

● 24-hour, 7-day digital process timer

● Temperature recorders (paper or paperless)

● Reverse door hinge

● Glass observation panel(s) in door(s)

● Floor stands (bench models only)

● Swivel casters with leveling feet

● Programmable controller, Ethernet and USB communications

● Data logging and trending

● Nine-point thermocouple monitoring system

● Variable frequency drive on circulation blower

● Exdusive, adjustable, semi-pierced duct walls for tuning of air flow

● Lead-in ports (various locations available)

● Electro-mechanical or pneumatic door lock

● Emergency stop

● Light tower assembly with audible alarm

● Maintenance lodk-out system

● Interior light

● Inert gas purge system

● Rear access door(s)

● Trace solvent safety package

● Main power fused disconnect switch

● Redundant over-temperature protection (high limit controller)

● UL508A labeled control panel

● Alternative exterior finishes

● CE Mark

Please contact the factory to inquire on other available or engineered to order options

Blue M warrants the equipment will be free from defects in material and workmanship for a periodof two (2) years from the date of shipment (or from the installation date if this service is provided byTPS or a TPS approved partner and the date is approved by TPS). If a TPS Preventive MaintenancePlan is purchased before the end of the standard warranty period, these limited warranties shall beextended by one (1) additional year. If within the warranty period the original purchaser notifiesBlue M in writing of an alleged non-conformity, and Blue M determines to its reasonable satisfactionthat the product or service is in fact non-conforming, then Blue M shall, at its option and expense,repair or replace the non-conforming product or correct the non-conforming service, either at theoriginal purchaser's facility, or Blue M's. Labor is only included for domestically installed units.Equipment installed outside of the United States (US A) will be one year parts only from dateof shipment. For full details, exclusions, and other information on our warranty please go to:https://wwww.thermalproductsolutions.com/support/blue-m