High acceleration life test box PC-R9 series
● Remote network monitoring
● Excellent box structure and materials
● One click cleaning function of test box
● Controller USB data output
● Air FAST function (optional)
Compared with traditional HAST devices, the new controller is easier to operate due to the use of an interactive touch screen input system.
Remote control can be achieved through the use of external terminal devices, enabling networked control of multiple machines and reducing the need for operator monitoring and operations.
The separated testing system has the following advantages compared to a single container system:
.Reduce mutual interference between the test box and steam generator, completely avoiding condensation
.Having a larger testing capacity
.Has a wider humidity range (65% -100%)
The electronic door lock system only requires pressing a button to open or close the door. Additionally, sliding the tray can open both the tray and the door simultaneously. In this way, users do not need to reach into the testing chamber to take out samples when the temperature is high just after the test is completed.
The bias terminal is installed on the inside of the door, which is very helpful for sample wiring.
Each enclosure comes with 20 bias terminals as standard, with a maximum of 100 bias terminals available for installation in PC-422R9 and 60 bias terminals available for installation in PC-304R9.
The unsaturated steam test mode allows the humidity to be set between 65% -100% RH without causing water droplets to condense. In addition, if it is a fixed value operation standard program function, it can be used to set the rise and fall rate and control the temperature. The test conditions specified by IEC60068-2-66, JISC0096, etc. can be met.
This mode is only used for wet saturated steam testing at 100% RH. Always maintain a 100% RH humidity state, also known as a wet saturation setting, which produces water droplets that condense and drip onto the sample.
The test can be conducted in the corresponding existing saturated pressure cooker.
After testing, the current humidity remains unchanged and slow cooling occurs.
After testing, the inside of the box is cooled by blowing air without exhausting until the pressure drops to 0 Pa to avoid the sample being damaged by pressure or blown dry by strong exhaust air. At the same time, this method of cooling is faster than natural cooling.
After testing, immediately open the exhaust valve to quickly release hot water and steam. This is equivalent to the testing done on a saturated pressure cooker.
HAST-NET RS232C interface
Control 16 HASTs simultaneously with one computer
Basket
PC-304R9:W172×D346×H30mm
PC-422R9:W252×D410×H30mm
Three layer tray
PC-304R9:W264×D350×H135mm
PC-422R9:W370×D412×H215mm
Pallet
Customizable
Recorder
Paper recorder
Paperless recorder
High voltage test wiring terminal
It can also be used in conjunction with ion migration devices for automatic measurement of insulation resistance
Bias terminal
Each box comes with 20 bias terminals as standard, up to 100 bias terminals can be installed in PC-422R9, and up to 60 bias terminals can be installed in PC-304R9
Water supply device for water injection tank
Pure water can be automatically supplied directly to the built-in water tank through the pipeline
High voltage terminal
Available at 1000V or 2000V
Maximum heat dissipation value
50W
Temperature, humidity, and control range during the testing process
| Model | PC-304R9 | PC-422R9 |
| Size | W710xD950xH1620mm | W710xD950xH1620mm |
| Test box size | Φ300D522(34.5L) | Φ420D657(84.4L) |
| Effective box size | Φ220D350(12L) | Φ340D475(40L) |
| Net weight | 260 kg | 295 kg |
| Power supply | 1ΦAC220V/230V/240V 50/60Hz 2.3kW | 1ΦAC220V/230V/240V 50/60Hz 3.0kW |
| Heater capacity | Steam generator 1.5kW | Steam generator 1.5kW |
| Test box 0.6kW | Test box 1.3kW | |
| Operation Mode | Program mode and dependent mode | |
| Program | Can create 150 models in 1500 steps (maximum) | |
| Test mode | Saturated/Unsaturated | |
| Temperature control | PID control/SCR control | |
| Test temperature Temperature range | 105.0~151.4C(at 100%RH) | 105.0~133.3C(at 100%RH) |
| 110.0~157.5C (at 85%RH) | 110.0~140.0C (at 85%RH) | |
| 118.0~162.5C (at 65%RH) | 118.0~150.0C (at 65%RH) | |
| Temperature control accuracy | 土0.5°C | |
| Distribution accuracy | 士0.5°C(at 100%RH) | |
| 1.0°C(at100%RH) | ||
| Humidity range | 65-100%RH | |
| Humidity control accuracy | 士3% RH(at 85% RH) | |
| Pressure range | 0.019~0.393MPa | 0.019 ~0.208MPa |
| Pressure vessel category | Small pressure vessels | |
| Test time | Continue for up to 500 hours | |
| Time range | 1 minute -999 hours 59 minutes | |
| Power failure protection | About 4 seconds | |
| Time to reach rated temperature | Approximately 70 minutes (time from room temperature to 120C/85% RH) | |
| Exhaust mode | Mode 1: Slow cooling at constant temperature Mode 2: Cooling mode to maintain humidity Mode 3: Strong exhaust | |
| Bias end | 20 per box (125V total 30W) | |
| Time signal terminal | 4 | |
| Emergency stop switch | Equipped | |
| Box | SUS316L stainless steel (electrolytic polishing) | |
| Water supply | Automatic supply from the water injection tank | |
| Door system | Motor drive system with tray | |
| Security Alert System | Overtemperature protection, dry burning protection, overpressure protection, leakage protection, overpressure safety valve, temperature sensor, power-off protection, box door lock abnormal protection, water supply abnormal protection | |
| Standard Accessories | Inlet pipe, drainage pipe, power cord, water supply tank, test basket, user manual | |
*The actual data is based on the assumption that the ambient temperature is normal indoor temperature and there are no samples inside the box. The power supply, voltage, and frequency mentioned above are fixed values
【 WeChat 】
Address：No. 501, Building 01, Northwest District, Suzhou Nano City,
No. 99, Jinjihu Avenue, Suzhou Industrial Park
Hotline：86-0512-62749825
Phone：86-18912625555 Mr Chen
Email：alan.chen@winwintek.com/ wuj@winwintek.com
Copyright © 2026 Win-Win Electronic Technology International Limited Su ICP NO.2025215884-1 Support：HuiCheng